100% Original Factory Mbr Sewage Treatment Plant - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo
100% Original Factory Mbr Sewage Treatment Plant - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo Detail:
Applications
● Purification of surface water.
● Reuse of heavy metal waste water.
● Pretreatment of RO.
Filtration Performance
Below filtration effects are proved according to the use of modified PVDF hollow fiber ultrafiltration membrane in different types of water:
| No. | Item | Water?Output?Index |
| 1 | TSS | ≤1mg/L |
| 2 | Turbidity | ≤ 1 |
Specifications
Size
Chart 1 MBR Size
Technical Parameters
| Filtering?Direction | Outside-in |
| Membrane?Material | Reinforced?Modified?PVDF |
| Precision | 0.03 ?micron |
| Membrane?Area | 30m2 |
| Membrane?ID/OD | 1.0mm/ 2.2mm |
| Size | 1250mm×2000mm×30mm |
| Joint?Size | Φ24.5mm |
Component Material
| Component | Material |
| Hollow?Fiber?Membrane | Reinforced?Modified?PVDF |
| Sealing Compound | Epoxy?Resins?+?Polyurethane (PU) |
| Housing | ABS |
Using Conditions
Proper pretreatments must be set when raw water contains a lot of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove foams in membrane tank when necessary, please use alcoholic defoamer which is not easy to scale.
| Item | Limit | Remark |
| PH?Range | 5-9 (2- 12 when?washing) | Neutral?PH?is?better?for?bacterial?culture |
| Particle?Diameter | <2mm | Prevent?sharp?particles?to?scratch?membrane |
| Oil?&?Grease | ≤2mg/L | Prevent?membrane?fouling/sharp?flux?decrease |
| Hardness | ≤150mg/L | Prevent?membrane?scaling |
Application Parameters
| Designed?Flux | 15~40L/m2.h |
| Backwashing?Flux | Twice?the?designed?flux |
| Operating?Temperature | 5~45°C |
| Maximum?Operating?Pressure | -50KPa |
| Suggested?Operating?Pressure | ≤-35KPa |
| Maximum?backwashing?Pressure | 100KPa |
| Operating?Mode | Continuous?opeartion, intermittent?backwashing?air?flushing |
| Blowing?Mode | Continuous?Aeration |
| Aeration?Rate | 4m3/h.piece |
| Washing?Period | Clean?water?backwashing?every?1~2h; CEB?every?1~2 days;Offline?washing?every?6~12 months
(Above?information?is?for?reference?only, please?adjust according?to?actual?differential?pressure?change?rule) |
Product detail pictures:
Related Product Guide:
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for 100% Original Factory Mbr Sewage Treatment Plant - MCR Membrane Module Reinforced PVDF BM-SLMCR-30 Replacing Project – Bangmo , The product will supply to all over the world, such as: Serbia, Frankfurt, Dubai, We rely on high-quality materials, perfect design, excellent customer service and the competitive price to win the trust of many customers at home and abroad. 95%products are exported to overseas markets.
By Mignon from Zimbabwe - 2018.09.19 18:37
Hope that the company could stick to the enterprise spirit of Quality, Efficiency, Innovation and Integrity, it will be better and better in the future.
By Page from Uzbekistan - 2017.01.11 17:15
Write your message here and send it to us
