Discountable price Membrane Filter Cartridge - UF Membrane Module PVC Ultrafiltration Membrane Module UFc50C Stainless Steel Housing Household Water Purification – Bangmo
Discountable price Membrane Filter Cartridge - UF Membrane Module PVC Ultrafiltration Membrane Module UFc50C Stainless Steel Housing Household Water Purification – Bangmo Detail:
Product?Overview
UFc50C? is? capillary? hollow? fiber? membrane? made? of? high? polymer? material, which is a separating product that will not have any phase change. The modified PVC material adopted to this product has good permeable rate, good mechanical strength, good? chemical? resistance? anti-pollution? ability,? MWCO? is? 100k? Dalton.? Membrane ID/OD? is? 1.0mm/1.8mm, ?filtering? direction? is? inside-out,? that? is? raw? water? flows inside the hollow fibers and, driven by differential pressure, permeates outwards so as to filter? bacteria, colloids, suspended substances,? microbes, and other? harmful substances.
Applications
Production of mineral water, mountain spring water and other germ-free liquid;
Drinking treatment of tap?water, surface?water, well?water?and?river?water;
Pre-treatment?of?RO?device;
Treatment, recycle and reuse of industrial wastewater
Filtration?Performance
According to the service conditions of modified PVC hollow fiber ultrafiltration membrane which? are? applied to various water? sources, the? product? is? proved to reach below filtration effects:
| Water?Composition | Filtering?Effect |
| Suspended Substances, Particles >1um | Removal Rate ≥99% |
| SDI | ≤?3 |
| Virus, Bacteria | >4 log |
| Turbidity | <0.1NTU |
| TOC | Removal Rate?0-25% |
Above data is obtained when turbidity of feed water is less than 15NTU. The product? is? proved? to? reach? the? sanitary? standards? of? drinking? water? by ?Health Department? of? Guangdong? Province.? Approval? number? is? YUE? WEI? SHUI? ZI? 2014S1671.
Product?Parameters
Product?Appearance
Figure 1 Product Dimensions
Inner?Filter
Figure 2 Inner Filter Dimensions
Technical?Parameters:
| Structure | Inside-out |
| Membrane?Material | Modified?PVC |
| MWCO | 100K Dalton |
| Nominal Membrane Area | 5.4m |
| Membrane?ID/OD | 1.0mm/1.8mm |
| Module Dimensions | Φ105mm×?1110mm |
| Connector Dimensions | 3/4” Female Thread |
Application?Data:
| Pure?Water?Flux | 1,700L/H (0.15MPa, 25oC) |
| Designed?Flux | 35-100L/H (0.15MPa, 25oC) |
| Operating?Pressure | ≤0.2MPa |
| Maximum Trans Membrane?Pressure | 0.2MPa |
| Maximum Operating Temperature | 45oC |
| Operating PH Range | 4-10 |
| Washing PH Range | 2-12 |
| Operating?Mode | Cross-flow/Dead-end Filtration |
Feed?Water Requirements:
A security filter, precision <50 micron, should be set as pretreatment of UF, in case of? blockage caused? by? large? particles? in? raw water. Attention:? UF? membrane material is macromolecular organic plastics, raw water must not contain any organic solvents.
| Feed?Water?Turbidity | ≤15NTU |
| Oil & Grease | ≤2mg/L |
| Feed?Water?SS | ≤20mg/L |
| Total?Iron | ≤1mg/L |
| Continuous Feeding Residual Chlorine | ≤5ppm |
| COD | Suggested ≤500mg/L |
Component?Material:
| Component | Material |
| Hollow?Fiber?Membrane | Modified?PVC |
| Potting Material | Epoxy?Resins |
| Membrane?Housing | SUS304 |
Typical?Operating?Parameters:
| Maximum Backwashing Pressure | 0.2MPa | |
| Backwashing?Flow?Rate | 100-150L/m2 .h | |
| Backwashing?Frequency | Every?30-60 minutes | |
| Backwashing?Duration | 30-60 seconds | |
| CEB Frequency | 0-4 times/day | |
| CEB Duration | 5-10 minutes | |
| CIP Frequency | 1-3 months | |
| General Washing Chemicals ： | ||
| Disinfection | 15ppm NaClO | |
| Organic?Contamination?Washing | 0.2% NaClo+0.1% NaOH | |
| Inorganic?Contamination?Washing | 1-2% Citric Acid /0.2% HCl | |
Product detail pictures:
Related Product Guide:
We take customer-friendly, quality-oriented, integrative, innovative as objectives. Truth and honesty is our administration ideal for Discountable price Membrane Filter Cartridge - UF Membrane Module PVC Ultrafiltration Membrane Module UFc50C Stainless Steel Housing Household Water Purification – Bangmo , The product will supply to all over the world, such as: Sweden, Georgia, Georgia, Since the establishment of our company, we've realized the importance of providing good quality goods and whole heartedly before-sales and after-sales services. problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.
By Sahid Ruvalcaba from Malawi - 2018.02.08 16:45
Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
By Pandora from Cannes - 2018.06.12 16:22
