日本熟日本熟妇在线视频_超碰大字幕在线大字幕_色屋任你精品亚洲香蕉_思思热在线视频在线

Factory Outlets Purification System - UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Grinding Waste Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It adheres on the tenet Honest, industrious, enterprising, innovative to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for Hollow Fiber Ultrafiltration Membrane , Ultrafiltration Membrane Material , Water Purifiers Filters , We have been sincerely looking forward to developing very good cooperative relationships with buyers from at home and abroad for creating a vibrant foreseeable future together.
Factory Outlets Purification System - UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Grinding Waste Water Treatment – Bangmo Detail:

Product Overview

UFf160 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

Applications

  • Drinking water treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient Effect
SS, Particles?> 1μm Removal Rate?≥ 99%
SDI ≤ 3
Bacteria, Viruses >?4 log
Turbidity < 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 25NTU.

Product Parameters

product-description110

Technical Parameters:

Filtering?Type Outside-in
Membrane?Material Modified?PVDF
MWCO 200K Dalton
Membrane?Area 40m2
Membrane?ID/OD 0.8mm/1.3mm
Dimensions Φ160mm*1810mm
Connector?Size DN40 Union Joint

Application Data:

Pure?Water?Flux 8,000L/H?(0.15MPa, 25C)
Designed?Flux 40-120L/m2.hr?(0.15MPa, 25C)
Suggested?Working?Pressure ≤ 0.2MPa
Maximum?Transmembrane?Pressure 0.15MPa
Maximum?Backwashing?Pressure 0.15MPa
Air?Washing?Volume 0.1-0.15N m3/m2 .hr
Air?Washing?Pressure ≤ 0.1MPa
Maximum?Working?Temperature 45C
PH?Range Working: 4-10; Washing: 2-12
Operating?Mode Cross Flow

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity ≤ 25NTU
Oil?&?Grease ≤?2mg/L
SS ≤ 20mg/L
Total?Iron ≤?1mg/L
Continuous?Residual?Chlorine ≤?5ppm
COD Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Backwashing?Flow?Rate 100-150L/m2.hr
Backwashing?Frequency Every?30-60min.
Backwashing?Duration 30-60s
CEB?Frequency 0-4?times per day
CEB?Duration 5-10min.
CIP?Frequency Every 1-3 months
Washing?Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic?Pollution?Washing 0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing 1-2% Citric?Acid/0.2% Hydrochloric?Acid

Component Material:

Component Material
Membrane Modified?PVDF
Sealing Epoxy?Resins
Housing UPVC
Product detail pictures:

Factory Outlets Purification System - UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Grinding Waste Water Treatment – Bangmo detail pictures

Factory Outlets Purification System - UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Grinding Waste Water Treatment – Bangmo detail pictures

Related Product Guide:
We not only will try our great to offer superb companies to just about every buyer, but also are ready to receive any suggestion offered by our shoppers for Factory Outlets Purification System - UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Grinding Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Portland, Hongkong, Hungary, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will offer our whole heartedly service to satisfy all your needs! Please contact us right away!
    • We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By Linda from Moscow - 2018.09.08 17:09
    The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Caroline from Lithuania - 2017.06.16 18:23
    Write your message here and send it to us