日本熟日本熟妇在线视频_超碰大字幕在线大字幕_色屋任你精品亚洲香蕉_思思热在线视频在线

Manufactur standard Water Membrane - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Cross Flow Membrane Filtration , Uf Membrane Filter , Hollow Fiber Uf Membrane , Now we have extensive goods source as well as price tag is our advantage. Welcome to inquire about our products and solutions.
Manufactur standard Water Membrane - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo Detail:

Product Overview

UFc160AL capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVC material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 100K Dalton, membrane ID/OD is 1.0mm/1.8mm, filtering type is inside-out.

Applications

  • Production of mineral water, spring water, or other sterile liquid.
  • Drinking treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient Effect
SS, Particles?> 1μm Removal Rate?≥ 99%
SDI ≤ 3
Bacteria, Viruses >?4 log
Turbidity <0. 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 15NTU. This product is qualified for drinking water related products

Product Parameters

product-description14

Technical Parameters:

Filtering?Type Inside-out
Membrane?Material Modified?PVC
MWCO 100K Dalton
Membrane?Area 16m2
Membrane?ID/OD 1.0mm/1.8mm
Dimensions Φ160mm*1415mm
Connector?Size DN32

Application Data:

Pure?Water?Flux 4,700L/H?(0.15MPa, 25C)
Designed?Flux 35-100L/m2.hr?(0.15MPa, 25C)
Suggested?Working?Pressure ≤ 0.2MPa
Maximum?Transmembrane?Pressure 0.2MPa
Maximum?Working?Temperature 45C
PH?Range Working: 4-10; Washing: 2-12
Operating?Mode Cross-flow?or?Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity ≤ 15NTU
Oil?&?Grease ≤?2mg/L
SS ≤ 20mg/L
Total?Iron ≤?1mg/L
Continuous?Residual?Chlorine ≤?5ppm
COD Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Maximum?Backwashing?Pressure 0.2MPa
Backwashing?Flow?Rate 100-150L/m2.hr
Backwashing?Frequency Every?30-60min.
Backwashing?Duration 30-60s
CEB?Frequency 0-4 times per day
CEB?Duration 5-10min.
CIP?Frequency Every 1-3 months
Washing?Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic?Pollution?Washing 0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing 1-2% Citric?Acid/0.2% Hydrochloric?Acid

Component Material:

Component Material
Membrane Modified?PVC
Sealing Epoxy?Resins
Housing UPVC

Product detail pictures:

Manufactur standard Water Membrane - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures

Manufactur standard Water Membrane - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo detail pictures


Related Product Guide:

Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for Manufactur standard Water Membrane - UF Membrane Module 6 inch PVC Ultrafiltration Membrane Module UFc160AL Well Water Treatment – Bangmo , The product will supply to all over the world, such as: Jakarta, Thailand, Pakistan, Our tenet is integrity first, quality . We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!
  • The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Flora from Madrid - 2018.12.10 19:03
    In China, we have purchased many times, this time is successful and satisfactory, a sincere and realiable Chinese manufacturer!
    5 Stars By Sahid Ruvalcaba from kazakhstan - 2017.09.09 10:18
    Write your message here and send it to us