日本熟日本熟妇在线视频_超碰大字幕在线大字幕_色屋任你精品亚洲香蕉_思思热在线视频在线

Manufacturer for Uf System Water Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Ultra Filtration Unit , Waste Water Filtration System , Ultrafiltration Technique , Welcome your traveling to and any your inquires,sincerely hope we could have chance to cooperate along with you and we can build-up extensive nicely small business romantic relationship along with you.
Manufacturer for Uf System Water Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo Detail:

Product Overview

UFf225 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

Applications

  • Drinking water treatment of tap water, surface water, well water and river water.
  • Pretreatment of RO.
  • Treatment, recycle and reuse of industrial waste water.

Filtration Performance

This product is proven to have below filtering effects according to the service?conditions of different water sources:

Ingredient Effect
SS, Particles?> 1μm Removal Rate?≥ 99%
SDI ≤ 3
Bacteria, Viruses >?4 log
Turbidity < 1NTU
TOC Removal Rate: 0-25%

*Above data is obtained under the condition that feeding water turbidity is < 25NTU.

Product Parameters

product-description112

Technical Parameters:

Filtering?Type Outside-in
Membrane?Material Modified?PVDF
MWCO 200K Dalton
Membrane?Area 60m2
Membrane?ID/OD 0.8mm/1.3mm
Dimensions Φ225mm*1860mm
Connector?Size DN50

Application Data:

Pure?Water?Flux 12,000L/H?(0.15MPa, 25C)
Designed?Flux 40-120L/m2.hr?(0.15MPa, 25C)
Suggested?Working?Pressure ≤ 0.2MPa
Maximum?Transmembrane?Pressure 0.15MPa
Maximum?Backwashing?Pressure 0.15MPa
Air?Washing?Volume 0.1-0.15N m3/m2 .hr
Air?Washing?Pressure ≤ 0.1MPa
Maximum?Working?Temperature 45C
PH?Range Working: 4-10; Washing: 2-12
Operating?Mode Cross-flow?or?Dead-end

Feeding Water Requirements:
Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

Turbidity ≤ 25NTU
Oil?&?Grease ≤?2mg/L
SS ≤ 20mg/L
Total?Iron ≤?1mg/L
Continuous?Residual?Chlorine ≤?5ppm
COD Suggested?≤ 500mg/L

*Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

Operating Parameters:

Backwashing?Flow?Rate 100-150L/m2.hr
Backwashing?Frequency Every?30-60min.
Backwashing?Duration 30-60s
CEB?Frequency 0-4?times per day
CEB?Duration 5-10min.
CIP?Frequency Every 1-3 months
Washing?Chemicals:
Sterilization 15ppm Sodium Hypochlorite
Organic?Pollution?Washing 0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
Inorganic?Pollution?Washing 1-2% Citric?Acid/0.2% Hydrochloric?Acid

Component Material:

Component Material
Membrane Modified?PVDF
Sealing Epoxy?Resins
Housing UPVC
Product detail pictures:

Manufacturer for Uf System Water Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo detail pictures

Manufacturer for Uf System Water Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo detail pictures

Related Product Guide:
Good quality comes 1st; assistance is fore; business enterprise is cooperation is our business enterprise philosophy which is regularly observed and pursued by our company for Manufacturer for Uf System Water Treatment - UF Membrane Module 9 inch PVDF Ultrafiltration Membrane Module UFf225 Dyeing Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Belize, Ukraine, Australia, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our whole heartedly service to satisfy all your needs! You should contact us right away!
    • As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Freda from Serbia - 2018.12.14 15:26
    The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By Meroy from Colombia - 2018.05.13 17:00
    Write your message here and send it to us