日本熟日本熟妇在线视频_超碰大字幕在线大字幕_色屋任你精品亚洲香蕉_思思热在线视频在线

Leave Your Message

MCR Membrane Module Reinforced PVDF BM-SLMCR-20 RO Pretreatment

●?Unique gradient reticular?pore structure, high filtering precision and good output quality;

●?Unbreakable hollow fibers, 3-layer protective structure, hollow fibers are not easy to fall off, service life can reach 5 years +;

    product details
    Product Tags

    Product?Overview

    Submerged ultrafiltration (MCR) Technology is a water treatment technology which combines membrane technology and physico-chemical precipitation process. High-precision sludge-water separation of outlet from coagulation sedimentation tank can ?be? done? by? submerged? ultrafiltration? (MCR),? high? filtering? precision? of memrbane insures high quality and clear water outlet.

    This product adopts reinforced modified PVDF material, which will not peel or break ?during? backwashing,? meanwhile? it? has? good? permeable? rate,? mechanical performance, chemical resistance and anti-fouling? ability. ID? & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtering precision is 0.03 micron.? Filtering? direction? is? outside-in,? that? is raw? water,? driven by? differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.

    Applications

    ● Purification of surface water;

    ● Reuse of heavy metal waste water;

    ● Pretreatment of RO.

    Filtration?Performance

    Below? filtration? effects? are? proved? according? to? the? use? of modified ?PVDF hollow fiber ultrafiltration membrane in different types of water:

    No. Item outlet water index
    1 TSS ≤1mg/L
    2 Turbidity ≤ 1

    Specifications

    Size

    1

    Chart 1 MBR Size

    Technical?Parameters:

    Filtering Direction Outside-in
    Membrane Material Reinforced Modified PVDF
    Precision 0.03? micron
    Membrane Area 20m2
    Membrane ID/OD 1.0mm/ 2.2mm
    Size 785mm×1510mm×40mm
    Joint Size DN32

    Component?Material:

    Component Material
    Membrane Reinforced Modified PVDF
    Sealing Epoxy Resins + Polyurethane (PU)
    Housing ABS

    Using?Conditions

    Proper?? pretreatments ??must?? be?? set?? when?? raw?? water?? contains?? a?? lot?? of impurities/coarse particles or large proportion of grease. Defoamer must be used to remove ?foams? in membrane tank when necessary, please use? alcoholic? defoamer which is not easy to scale.

    Item Limit Remark
    PH Range 5-9 (2- 12 when washing) Neutral PH is better for bacterial culture
    Particle Diameter <2mm Prevent sharp particles to scratch membrane
    Oil & Grease ≤2mg/L Prevent membrane fouling/sharp flux decrease
    Hardness ≤150mg/L Prevent membrane scaling

    Application?Parameters:

    Designed Flux 15~40L/m2.hr
    Backwashing Flux Twice the designed flux
    Operating Temperature 5~45°C
    Maximum Operating Pressure -50KPa
    Suggested Operating Pressure ≤-35KPa
    Maximum backwashing Pressure 100KPa
    Operating Mode Continuous opeartion, intermittent backwashing air flushing
    Blowing Mode Continuous Aeration
    Aeration Rate 4m3/h.piece
    Washing Period Clean water backwashing every 1~2h; CEB every 1~2 days;Offline washing every 6~12 months(Above information is for reference only, please adjustaccording to actual differential pressure change rule)