We try for excellence, service the customers, hopes to be effective cooperation workforce and dominator company for staff, suppliers and shoppers, realizes price share and ongoing marketing for Membrane Filtration Unit , Waste Water Filter System , Ultrafiltration Membrane , We sincerely welcome clients from both of those at your home and overseas to occur to barter business enterprise with us.
PriceList for Membrane Pressure - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
No. |
Item |
Water?Output?Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤?1 |
Specifications
Size

Technical Parameters
Structure |
Outside-in |
Membrane?Material |
Reinforced Modified?PVDF |
Precision |
0.1 ?micron |
Membrane?Area |
25m2 |
Membrane?ID/OD |
1.0mm/ 2.2mm |
Size |
785mm×2000mm×40mm |
Joint Size |
DN32 |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane?(PU) |
Housing |
ABS |
Application Parameters
Designed?Flux |
10~25L/m2.h |
Backwashing?Flux |
30~60L/m2.h |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested?Operating?Pressure |
0~-35KPa |
Maximum?backwashingPressure |
100KPa |
Operating Mode |
9min?Operation+1min?Break/8min?Operaetion+2min Break |
Blowing?Mode |
Continuous Aeration |
Aeration?Rate |
4m3/h.pc |
Washing Period |
Clean?water?backwashing?every?2~4h; CEB?every?2~4 weeks; CIP?every?6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
Item |
Value |
PH?Range |
5~9 (washing: 2~12) |
Particle?Size |
<2mm, no?sharp?particles |
Oil & Grease |
≤2mg/L |
Hardness |
≤150mg/L |
Product detail pictures:
Related Product Guide:
Our target is always to satisfy our customers by offering golden support, superior value and high quality for PriceList for Membrane Pressure - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Barcelona, Malawi, France, Our company regards reasonable prices, efficient production time and good after-sales service as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.