日本熟日本熟妇在线视频_超碰大字幕在线大字幕_色屋任你精品亚洲香蕉_思思热在线视频在线

Leave Your Message

UF Membrane Module 6 inch PVDF Ultrafiltration Membrane Module UFf160 Grinding Waste Water Treatment

● Bangmo PVDF material has good pollution resistance, oxidation resistance, and is easy to clean;

●?Bangmo PVDF material has high flux, stable output and long service life;

●?Easy control, continuous operation, remote control;

●?Online gas-water washing, good flux recovery;

●?Small footprint, compact structure, modular design is applicable to different operation capacity;

●?Super low pressure operation, energy saving;

●?Industrial chemicals can be used for membrane washing so as to save costs;

●?Good output quality, high recovery rate, water source saving;

    product details
    Product Tags

    Product Overview

    UFf160 capillary hollow fiber membrane is high polymer material, which will not have any phase change. Modified PVDF material, which is adopted on this product, has good permeable rate, good mechanical properties, good chemical resistance and pollution resistance. MWCO is 200K Dalton, membrane ID/OD is 0.8mm/1.3mm, filtering type is outside-in.

    Applications

    • Drinking water treatment of tap water, surface water, well water and river water.
    • Pretreatment of RO.
    • Treatment, recycle and reuse of industrial waste water.

    Filtration Performance

    This product is proven to have below filtering effects according to the service?conditions of different water sources:

    Ingredient Effect
    SS, Particles?> 1μm Removal Rate?≥ 99%
    SDI ≤ 3
    Bacteria, Viruses >?4 log
    Turbidity < 1NTU
    TOC Removal Rate: 0-25%

    *Above data is obtained under the condition that feeding water turbidity is < 25NTU.

    Product Parameters

    1

    Technical Parameters:

    Filtering?Type Outside-in
    Membrane?Material Modified?PVDF
    MWCO 200K Dalton
    Membrane?Area 40m2
    Membrane?ID/OD 0.8mm/1.3mm
    Dimensions Φ160mm*1810mm
    Connector?Size DN40 Union Joint

    Application Data:

    Pure?Water?Flux 8,000L/H?(0.15MPa, 25℃)
    Designed?Flux 40-120L/m2.hr (0.15MPa, 25℃)
    Suggested?Working?Pressure ≤ 0.2MPa
    Maximum?Transmembrane?Pressure 0.15MPa
    Maximum?Backwashing?Pressure 0.15MPa
    Air?Washing?Volume 0.1-0.15N m3/m2 .hr
    Air?Washing?Pressure ≤ 0.1MPa
    Maximum?Working?Temperature 45℃
    PH?Range Working: 4-10; Washing: 2-12
    Operating?Mode Cross Flow

    Feeding Water Requirements:
    Before feeding water, a security filter < 50 μm should be set to prevent blockage caused?by large particles in raw water.

    Turbidity ≤ 25NTU
    Oil?&?Grease ≤?2mg/L
    SS ≤ 20mg/L
    Total?Iron ≤?1mg/L
    Continuous?Residual?Chlorine ≤?5ppm
    COD Suggested?≤ 500mg/L

    *Material of UF membrane is polymer organic plastic, there must not be any organic solvents in raw water.

    Operating Parameters:

    Backwashing?Flow?Rate 100-150L/m2.hr
    Backwashing?Frequency Every?30-60min.
    Backwashing?Duration 30-60s
    CEB?Frequency 0-4?times per day
    CEB?Duration 5-10min.
    CIP?Frequency Every 1-3 months
    Washing?Chemicals:
    Sterilization 15ppm Sodium Hypochlorite
    Organic?Pollution?Washing 0.2%?Sodium Hypochlorite + 0.1% Sodium Hydroxide
    Inorganic?Pollution?Washing 1-2% Citric?Acid/0.2% Hydrochloric?Acid

    Component Material:

    Component Material
    Membrane Modified?PVDF
    Sealing Epoxy?Resins
    Housing UPVC